Spray drying and hot-melt extrusion are among the most prevalent preparation techniques used in the pharmaceutical industry to produce amorphous solid dispersions (ASDs). This study advances previous research by integrating sample production, comprehensive analytical characterization, intrinsic dissolution rate measurements, and assessments of the behavior of ASDs under elevated temperature and humidity conditions. The study focuses on indomethacin, a widely used model for poorly soluble drugs, processed with PVP K30 or HPMC E5, both commonly used polymers. The findings demonstrate that hot-melt extruded samples exhibit superior stability against recrystallization, whereas spray dried samples achieve higher intrinsic dissolution rates. Furthermore, PVP K30 significantly outperforms HPMC E5 in the co-processing of indomethacin, enhancing both the intrinsic dissolution rate and the stability.
- MeSH
- Hypromellose Derivatives chemistry MeSH
- Chemistry, Pharmaceutical methods MeSH
- Indomethacin * chemistry MeSH
- Crystallization * MeSH
- Povidone chemistry MeSH
- Drug Compounding methods MeSH
- Solubility * MeSH
- Spray Drying * MeSH
- Drug Stability * MeSH
- Hot Melt Extrusion Technology * methods MeSH
- Drug Liberation MeSH
- Humidity MeSH
- Hot Temperature MeSH
- Desiccation methods MeSH
- Publication type
- Journal Article MeSH
Nowadays, most of the newly developed active pharmaceutical ingredients (APIs) consist of cohesive particles with a mean particle size of <100μm, a wide particle size distribution (PSD) and a tendency to agglomerate, therefore they are difficult to handle in continuous manufacturing (CM) lines. The current paper focuses on the impact of various glidants on the bulk properties of difficult-to-handle APIs. Three challenging powders were included: two extremely cohesive APIs (acetaminophen micronized (APAPμ) and metoprolol tartrate (MPT)) which previously have shown processing issues during different stages of the continuous direct compression (CDC)-line and a spray dried placebo (SD) powder containing hydroxypropylmethyl cellulose (HPMC), known for its sub-optimal flow with a high specific surface area (SSA) and low density. Four flow-enhancing excipients were used: a hydrophilic (Aerosil® 200) and hydrophobic (Aerosil® R972) fumed silica grade, a mesoporous silica grade (Syloid® 244FP), and a calcium phosphate excipient (TRI-CAFOS® 200-7). The APIs and binary API/glidant blends (varied between 0.5-2.75 w/w%) were characterized for their bulk properties relevant for CDC. The results indicated that optimizing different bulk parameters (e.g., density, flow, compressibility..) of an API required varying weight percentages of the glidant (e.g., different surface area coverage (SAC)) depending on the APIs. Moreover, even at similar SAC, the impact of the glidant on the bulk characteristic of the APIs depended on the glidant type properties. While nano-sized silicon dioxide were effective for improving the flowability of a powder, other glidants (mesoporous silica and tricalcium phosphate (TCP)) showed also promise as alternatives. Additionally, an excess of glidant, referred to as oversilication, negatively impacted some bulk parameters, but other characteristics were unaffected. Finally, to determine the appropriate concentration of the different classes of glidants, SAC calculations, an understanding of the glidant's working mechanism, and knowledge about the API's characteristics (i.e., morphology, compressibility, flowability, aeration, density, and wall friction) are required. This study confirmed the necessity of including various material characterization techniques to assess the impact of glidants on the bulk characteristics of APIs.
- MeSH
- Hypromellose Derivatives * chemistry MeSH
- Chemistry, Pharmaceutical methods MeSH
- Calcium Phosphates * chemistry MeSH
- Hydrophobic and Hydrophilic Interactions MeSH
- Metoprolol * chemistry MeSH
- Bulk Drugs MeSH
- Silicon Dioxide chemistry MeSH
- Acetaminophen * chemistry MeSH
- Excipients * chemistry MeSH
- Powders * MeSH
- Drug Compounding methods MeSH
- Rheology * MeSH
- Particle Size * MeSH
- Publication type
- Journal Article MeSH
OBJECTIVE: This research aims to design and evaluate an enteric-coated hard capsule dosage form for targeted delivery of biological materials, such as FMT (fecal microbiota transplant) or live microbes, to the distal parts of the GIT. The capsules are designed to be internally protected against destruction by hydrophilic filling during passage through the digestive tract. METHODS: Hard gelatin capsules and DRcapsTMcapsules based on HPMC and gellan were used to encapsulate a hydrophilic body temperature-liquefying gelatin hydrogel with caffeine or insoluble iron oxide mixture. Different combinations of polymers were tested for the internal (ethylcellulose, Eudragit® E, and polyvinyl acetate) and external (Eudragit® S, Acryl-EZE®, and cellacefate) coating. The external protects against the acidic gastric environment, while the internal protects against the liquid hydrophilic filling during passage. Coated capsules were evaluated using standard disintegration and modified dissolution methods for delayed-release dosage forms. RESULTS: Combining suitable internal (ethylcellulose 1.0 %) and external (Eudragit® S 20.0 %) coating of DRcapsTM capsules with the wiping and immersion method achieved colonic release times. While most coated capsules met the pharmaceutical requirements for delayed release, one combination stood out. Colonic times were indicated by the dissolution of soluble caffeine (during 120-720 min) measured by the dissolution method, and capsule rupture was indicated by the release of insoluble iron oxide (after 480 min) measured by the disintegration method. This promising result demonstrates the composition's suitability and potential to protect the content until it's released, inspiring hope for the future of colon-targeted delivery systems and its potential for the pharmaceutical and biomedical fields. CONCLUSION: Innovative and easy capsule coatings offer significant potential for targeted drugs, especially FMT water suspension, to the GIT, preferably the colon. The administration method is robust and not considerably affected by the quantity of internal or external coatings. It can be performed in regular laboratories without specialized individual and personalized treatment equipment, making it a practical and feasible method for drug delivery.
- MeSH
- Polysaccharides, Bacterial chemistry MeSH
- Biocompatible Materials chemistry MeSH
- Cellulose * chemistry analogs & derivatives MeSH
- Hypromellose Derivatives chemistry MeSH
- Hydrophobic and Hydrophilic Interactions * MeSH
- Hydrogels chemistry MeSH
- Caffeine chemistry administration & dosage MeSH
- Colon * metabolism MeSH
- Polymethacrylic Acids chemistry MeSH
- Drug Delivery Systems * methods MeSH
- Delayed-Action Preparations chemistry MeSH
- Polymers chemistry MeSH
- Polyvinyls chemistry MeSH
- Capsules * MeSH
- Drug Liberation * MeSH
- Gelatin * chemistry MeSH
- Ferric Compounds chemistry administration & dosage MeSH
- Publication type
- Journal Article MeSH
Treating oral diseases remains challenging as API is quickly washed out of the application site by saliva turnover and mouth movements. In situ gels are a class of application forms that present sol-gel transition's ability as a response to stimuli. Their tunable properties are provided using smart polymers responsible for stimuli sensitivity, often providing mucoadhesivity. In this study, antimicrobial in situ gels of thermosensitive and pH-sensitive polymers loaded with silver nanoparticles were prepared and evaluated. The nanoparticles were prepared by green synthesis using Agrimonia eupatoria L. extract. According to the data analysis, the in situ gel with the most promising profile contained 15 % of Pluronic® F-127, 0.25 % of methylcellulose, and 0.1 % of Noveon® AA-1. Pluronic® F-127 and methylcellulose significantly increased the viscosity of in situ gels at 37 °C and shear rates similar to speaking and swallowing. At 20 °C, a behavior close to a Newtonian fluid was observed while being easily injectable (injection force 13.455 ± 1.973 N). The viscosity of the formulation increased with temperature and reached 2962.77 ± 63.37 mPa·s (37 °C). A temperature increase led to increased adhesiveness and rigidity of the formulation. The critical sol-gel transition temperature at physiological pH was 32.65 ± 0.35 °C. 96.77 ± 3.26 % of Ag NPs were released by erosion and dissolution of the gel after 40 min. The determination of MIC showed effect against E. coli and S. aureus (0.0625 mM and 0.5000 mM, respectively). The relative inhibition zone diameter of the in situ gel was 73.32 ± 11.06 % compared to gentamicin sulfate. This work discusses the optimization of the formulation of novel antibacterial in situ gel for oromucosal delivery, analyses the impact of the concentration of excipients on the dependent variables, and suggests appropriate evaluation of the formulation in terms of its indication. This study offers a promising dosage form for local treatment of oral diseases.
Branched copolymer surfactants (BCS) containing thermoresponsive polymer components, hydrophilic components, and hydrophobic termini allow the formation of emulsions which switch from liquid at room temperature to a gel state upon heating. These materials have great potential as in situ gel-forming dosage forms for administration to external and internal body sites, where the emulsion system also allows effective solubilisation of a range of drugs with different chemistries. These systems have been reported previously, however there are many challenges to translation into pharmaceutical excipients. To transition towards this application, this manuscript describes the evaluation of a range of pharmaceutically-relevant oils in the BCS system as well as evaluation of surfactants and polymeric/oligomeric additives to enhance stability. Key endpoints for this study are macroscopic stability of the emulsions and rheological response to temperature. The effect of an optimal additive (methylcellulose) on the nanoscale processes occurring in the BCS-stabilised emulsions is probed by small-angle neutron scattering (SANS) to better comprehend the system. Overall, the study reports an optimal BCS/methylcellulose system exhibiting sol-gel transition at a physiologically-relevant temperature without macroscopic evidence of instability as an in situ gelling dosage form.
Pharmaceutical nanocrystals represent a promising new formulation that combines the benefits of bulk crystalline materials and colloidal nanoparticles. To be applied in vivo, nanocrystals must meet several criteria, namely colloidal stability in physiological media, non-toxicity to healthy cells, avoidance of macrophage clearance, and bioactivity in the target tissue. In the present work, curcumin, a naturally occurring poorly water-soluble molecule with a broad spectrum of bioactivity has been considered a candidate substance for preparing pharmaceutical nanocrystals. Curcumin nanocrystals in the size range of 40-90 nm were prepared by wet milling using the following combination of steric and ionic stabilizers: Tween 80, sodium dodecyl sulfate, Poloxamer 188, hydroxypropyl methylcellulose, phospholipids (with and without polyethylene glycol), and their combination. Nanocrystals stabilized by a combination of phospholipids enriched with polyethylene glycol proved to be the most successful in all evaluated criteria; they were colloidally stable in all media, exhibited low macrophage clearance, and proved non-toxic to healthy cells. This curcumin nanoformulation also exhibited outstanding anticancer potential comparable to commercially used cytostatics (IC50 = 73 μM; 24 h, HT-29 colorectal carcinoma cell line) which represents an improvement of several orders of magnitude when compared to previously studied curcumin formulations. This work shows that the preparation of phospholipid-stabilized nanocrystals allows for the conversion of poorly soluble compounds into a highly effective "solution-like" drug delivery system at pharmaceutically relevant drug concentrations.
- MeSH
- Hypromellose Derivatives MeSH
- Sodium Dodecyl Sulfate chemistry MeSH
- Phospholipids MeSH
- Curcumin * chemistry pharmacology MeSH
- Pharmaceutical Preparations MeSH
- Macrophages MeSH
- Nanoparticles * chemistry MeSH
- Poloxamer chemistry MeSH
- Polyethylene Glycols chemistry MeSH
- Polysorbates MeSH
- Solubility MeSH
- Particle Size MeSH
- Water MeSH
- Publication type
- Journal Article MeSH
PURPOSE: Fluid-bed coating processes make it possible to manufacture pharmaceutical products with tuneable properties. The choice of polymer type and coating thickness provides control over the drug release characteristics, and multi-layer pellet coatings can combine several active ingredients or achieve tailored drug release profiles. However, the fluid-bed coating is a parametrically sensitive process due to the simultaneous occurrence of polymer solution spraying and solvent evaporation. Designing a robust fluid-bed coating process requires the knowledge of thin film drying kinetics, which in turn critically depends on an accurate description of concentration-dependent solvent diffusion in the polymer. METHODS: This work presents a mathematical model of thin film drying as an enabling tool for fluid-bed process design. A custom-built benchtop drying cell able to record and evaluate the drying kinetics of a chosen polymeric excipient has been constructed, validated, and used for data collection. RESULTS: A semi-empirical mathematical model combining heat transfer, mass transfer, and film thickness evolution was formulated and used for estimating the solvent diffusion coefficient and solvent distribution in the polymer layer. The combined experimental and computational methodology was then used for analysing the drying kinetics of common polymeric excipients: poly(vinylpyrrolidone) and two grades of hydroxypropyl methylcellulose. CONCLUSIONS: The experimental setup together with the mathematical model represents a valuable tool for predictive modeling of pharmaceutical coating processes.
- MeSH
- Hypromellose Derivatives MeSH
- Kinetics MeSH
- Polymers * MeSH
- Excipients * MeSH
- Solvents MeSH
- Publication type
- Journal Article MeSH
The design of improved biopolymeric based hydrogel materials with high load-capacity to serve as biocompatible drug carriers is a challenging task with vital implications in health sciences. In this work, chitosan crosslinked dialdehyde xanthan gum interpenetrated hydroxypropyl methylcellulose gels were developed for the controlled delivery of different antibiotic drugs including ampicillin, minocycline and rifampicin. The prepared hydrogel scaffolds were characterized by rheology method, FTIR, SEM, TGA and compression analysis. In addition, gelation kinetics, swelling, in vitro degradation and drug release rate were studied under simulated gastrointestinal fluid conditions of pH 2.0 and 7.4 at 37 °C. Results demonstrated the gel composition and structure affected drug release kinetics. The release study showed more than 50% cumulative release within 24 h for all investigated antibiotic drugs. In vitro cell cytocompatibility using mouse embryonic fibroblast cell lines depicted ≥80% cell viability, indicating the gels are non-toxic. Finally, the antibacterial activity of loaded gels was evaluated against Gram-negative and positive bacteria (Escherichia coli, Staphylococcus aureus and Klebsiella pneumonia), which correlated well with swelling and drug release results. Overall, the present study demonstrated that the produced hydrogel scaffolds serves as promising material for controlled antibiotic delivery towards microbial growth inhibition.
- MeSH
- Ampicillin pharmacology MeSH
- Anti-Bacterial Agents pharmacology MeSH
- Polysaccharides, Bacterial chemistry MeSH
- Biocompatible Materials chemistry MeSH
- Cell Line MeSH
- Chitosan chemistry MeSH
- Hypromellose Derivatives chemistry MeSH
- Escherichia coli drug effects MeSH
- Fibroblasts MeSH
- Hydrogels chemical synthesis chemistry pharmacokinetics toxicity MeSH
- Hydrogen-Ion Concentration MeSH
- Microbial Sensitivity Tests MeSH
- Microscopy, Electron, Scanning MeSH
- Minocycline pharmacology MeSH
- Mice MeSH
- Drug Carriers chemistry MeSH
- Rheology MeSH
- Rifampin pharmacology MeSH
- Spectroscopy, Fourier Transform Infrared MeSH
- Staphylococcus aureus drug effects MeSH
- Thermogravimetry MeSH
- Drug Liberation MeSH
- Cell Survival drug effects MeSH
- Animals MeSH
- Check Tag
- Mice MeSH
- Animals MeSH
- Publication type
- Journal Article MeSH
Nucleic acid aptamers are single-stranded (ss)DNA or RNA oligonucleotides that can take various conformations and bind specifically and with high affinity to selected targets. While the introduction of SELEX (systematic evolution of ligands by exponential enrichment) revolutionized the production of the aptamers, this procedure is impeded by the formation of undesirable by-products reflecting hybridization among complementary oligonucleotides in the ssDNA libraries during asymmetric PCR. To reduce nonspecific amplification we tested cellulose-derived compounds and found that sodium carboxymethylcellulose (CMC) at a concentration 0.05%-0.2% efficiently suppressed production of undesirable large DNA amplicons during asymmetric PCR in the course of SELEX. Formation of the PCR by-products was reduced by CMCs of low and medium viscosity more than by CMCs of high viscosity, and all of them bound to DNA oligonucleotides as determined by electrophoresis in agarose gels. In contrast to CMC, methylcellulose did not reduce the formation of the PCR by-products and did not bind to DNA. DNA aptamers selected in the presence of CMC could be used directly in enzyme-linked immunosorbent-like assay. The combined data suggest that CMC binds weekly to DNA oligonucleotides through hydroxyl groups and in this way inhibits low-affinity DNA-DNA hybridization and enhances the production of specific amplicons in asymmetric PCR.
- MeSH
- SELEX Aptamer Technique methods MeSH
- Aptamers, Nucleotide chemistry MeSH
- Enzyme-Linked Immunosorbent Assay methods MeSH
- DNA, Single-Stranded chemistry MeSH
- Methylcellulose chemistry MeSH
- Polymerase Chain Reaction methods MeSH
- Carboxymethylcellulose Sodium chemistry MeSH
- Publication type
- Journal Article MeSH
- Research Support, Non-U.S. Gov't MeSH
The preparation of an amorphous solid dispersion (ASD) is a promising strategy for improving the poor oral bioavailability of many active pharmaceutical ingredients (APIs). However, poor predictability of ASD long-term physical stability remains a prevalent problem. The purpose of this study was to evaluate and compare the predictive performance of selected models concerning solid-liquid equilibrium (SLE) curve and glass-transition temperature (Tg) line modeling of ibuprofen (IBU) in cellulosic polymers (i.e., hydroxypropyl methylcellulose (HPMC) and hydroxypropyl methylcellulose acetate succinate (HPMCAS)). For SLE curve modeling, an empiricalanalyticalapproach(Kyeremateng et al., 2014)and the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) equation of state (EOS) were chosen. Due to the unavailability of PC-SAFT parameters for both polymers, an approximation procedure for parametrization was applied. The Gordon-Taylor equation and Kwei equation were considered for Tg line determination. The impact of various computational set-ups (e.g., model parametrization or extrapolation length) on IBU solubility prediction at storage conditions was thoroughly investigated, assessed and confronted with the results from an 18-month physical stability study. IBU developed stable 20 wt% API content ASDs with both HPMC and HPMCAS.The extrapolation behavior and subsequent ASD thermodynamic stability prediction at storage conditions deduced from the aforementioned models weresignificantly different. Overall, the PC-SAFT EOS predicted higher IBU solubility in both polymers and, thus, a lower recrystallization tendency when compared to the empirical analytical approach. At higherIBU concentrations, liquid-liquid demixing inIBU-polymer systems was predicted by the PC-SAFT EOS, which was in qualitative disagreement with experimental observation.
